Where Is the Copper Shortage?
The ICSG expects tight smelter feed and a global refined surplus. We trace how a copper shortage in feed could reach miners and smelters.
by Dominic Rhee7 min read

Is there a copper shortage? The International Copper Study Group's Oct. 14, 2026 forecast points to a constraint in concentrate, the copper-rich feed that mines sell to smelters. The group expects the “constrained availability of concentrates” to reduce output from the conventional concentrate-to-refined route, even as it projects a global refined surplus of about 104,000 tonnes for the year.
Refined copper is the finished metal that manufacturers turn into products such as wire and tubing. The forecast cannot tell us whether that metal is tight in any particular market today. A smelter that needs concentrate and a wire maker that needs refined copper can face different buying conditions, with different consequences for the margin your copper company earns.
Where the Copper Supply Chain Is Tight
Mines produced less copper while refineries produced more in the ICSG's preliminary bulletin data. From January through August 2026, world mine output fell 0.9%, while refined output rose 1.7%, both compared with the same months in 2025.
By our arithmetic, scrap-based output accounted for 181,000 tonnes of the 321,000-tonne increase in refined output from January through August 2026 compared with the same months in 2025. A refinery drawing on recovered copper can put more finished metal on the market without relying on an increase in newly mined feed.
There is also a route from the mine to refined copper that bypasses the concentrate market. Solvent extraction and electrowinning, known as SX-EW, produces refined copper without smelting concentrate. The ICSG's October forecast expects that route and scrap to help offset a decline in refined output made through the conventional concentrate route. A rise in total refined production can therefore coexist with a tighter market for the plant that needs to buy concentrate.
The ICSG's forecast lowered its expectations for Chilean, Chinese and Indonesian mine production. We used a distinction that applies here in Codelco Lowers Its Copper Output Forecast: a forecast and a historical production record answer different questions, and neither is a record of shipments. We would need delivery data to tell how an individual mine's production outlook changes the copper available to its customers.
Why Copper Can Stay Expensive as LME Stocks Rise
Warehouse stocks measure metal in a delivery network, while the price reflects what buyers and sellers expect to be able to get, where and when they need it. The London Metal Exchange's copper contract can be settled through physical delivery and trades at dates well beyond the next shipment. More metal in an exchange shed can improve delivery availability there without changing what a buyer elsewhere must pay to secure a prompt shipment.
The LME's October stock report puts closing copper stocks at 248,650 tonnes on Oct. 1. They reached 293,775 tonnes on Oct. 30. That's an 18.1% increase between the Oct. 1 and Oct. 30 closes in 2026, by our arithmetic. The stock count alone cannot distinguish new refined output from metal moved into those warehouses from elsewhere.
Copper was expensive relative to a year earlier on the ICSG's price series before that inventory build. The bulletin puts the average LME copper price at US$13,296 per tonne from January through August 2026. The same January to August average was US$9,504 in 2025. Those sources leave open whether prices stayed elevated during the October stock build and why prices might have been high then. The price averages end before the warehouse comparison begins.
To see whether a stock build is easing the refined market, we would compare prices for delivery now with prices for delivery later. A buyer paying a premium for immediate metal even as one exchange's stocks rise would send a different signal from a buyer who can obtain it without that premium. We would also want to know whether the extra stock is in a place that can supply that buyer.
What the ICSG Forecasts for Refined Copper
The ICSG's Oct. 14, 2026 outlook puts the 2027 refined surplus at about 368,000 tonnes. It expects mine production growth to accelerate as producers expand operations and disrupted mines recover. It also expects more refined output from new or expanding smelters and refineries, as well as from scrap and SX-EW.
World Refined Copper Surplus, Thousand Metric Tonnes
Source: ICSG Copper Market Forecast, Oct. 14, 2026; China apparent usage basis
| Label | Value |
|---|---|
| 2025 reported | 419 |
| 2026 forecast | 104 |
| 2027 forecast | 368 |
The projected 2026 surplus is less than half of one per cent of the year's projected refined usage, by our arithmetic. The forecast balance subtracts projected refined usage from adjusted projected refined production. The cushion can shrink if recovering mines deliver less than the group assumes or if buyers use more copper than forecast. The balance does not show where those tonnes will be held.
For a check against the forecast, the preliminary monthly bulletin put the refined surplus at 218,000 tonnes from January through August 2026. Refined production exceeded usage on the bulletin's measure over that period, which leaves the full-year outcome open. Nor does that positive global figure show the availability of copper in a particular delivery market.
The word “apparent” also limits what we can conclude from the forecast balance. For China, the forecast estimates usage from output and net trade, adjusted for reported Shanghai Futures Exchange stock changes. It says the calculation “does not consider changes in unreported stocks.” Copper moving into or out of stocks outside that calculation can change the picture without a corresponding change in how much metal factories use. The monthly bulletin shows a separate balance that estimates changes in Chinese bonded inventories, a distinct series from the one used in the forecast chart.
Low Treatment Charges Squeeze Smelters That Buy Feed
A treatment charge is a fee for processing concentrate. If a smelter accepts a lower fee in order to secure feed, it takes in less processing revenue for each tonne on those terms, all else equal. A mine paying less for processing can keep more of what it earns on the copper it sells. A high refined copper price alone does not tell us how much a processor is earning for that work.
Teck Resources (NYSE: TECK) shows what lower fees can look like on the mining side. Its Oct. 28, 2026 results say strong cost performance and “lower smelter processing charges” reduced its third-quarter copper net cash unit costs, a non-GAAP measure, to US$1.77 per pound. The charges are only one of the reasons costs fell.
A plant may have reason to run fewer tonnes if fees no longer cover what it costs to process them. The ICSG's preliminary smelter data show world smelter output rose 3.6% from a year earlier in January through August 2026. The aggregate increase leaves open what happened at any individual plant. For a miner with its own smelter, the fee has its most direct effect on concentrate bought or sold outside the company. The cost of operating its own plant still has to be paid.
What Copper Shareholders Can Track
A mine that can keep shipping can benefit from better concentrate terms or a higher copper price. We would judge that upside against how much saleable metal the company can deliver, since a rise in price cannot earn revenue on metal that stays at the mine.
Freeport-McMoRan (NYSE: FCX) has room to sell more copper if its Grasberg recovery delivers. Its Oct. 27, 2026 report expects significant growth in mining operations in the Grasberg district in 2027 and 2028. It also says PT Freeport Indonesia's smelter restarted in late August 2026. For FCX holders, a delay at the mine or plant can still limit saleable pounds. In our Nov. 18, 2026 piece Freeport-McMoRan Stock Falls 6.56%, we calculated a hypothetical gross sales-value gap at planned volumes. A shortfall in those volumes would change the calculation even if prices held up.
For Teck holders, lower processing charges can reduce unit costs, while the amount of copper the company can sell still depends on the mine. In the October results, Teck said weather disruptions and wet mining conditions at Quebrada Blanca reduced access to planned higher-grade ore. Lower charges do not settle whether the mine can deliver its planned volumes.
Southern Copper (NYSE: SCCO) has another route to market if refined prices firm. Its 2025 production table lists SX-EW output at La Caridad and Buenavista in Mexico and at Toquepala in Peru. Those operations have a route to refined copper that does not depend on concentrate treatment terms. The copper they sell still faces the risk of lower refined prices or weaker-than-planned recoveries at the mine.
At the ICSG's April 2027 meetings, we'll take stock of the intervening monthly balances and warehouse reports and compare them with any new outlook. A sustained refined deficit alongside falling deliverable stocks would change our view: buyers of finished metal would have more reason to compete for shipments, too.
The smelter buys feed and the wire mill buys metal. A shortage at one gate need not reach the other.
Seek the truth and be prepared,
Equedia
Sources
- International Copper Study Group, Copper Market Forecast
- International Copper Study Group, World Refined Copper Production and Usage Trends
- International Copper Study Group, Copper Mine, Smelter, Refinery Production and Refined Copper Usage by Geographical Area
- London Metal Exchange, LME Copper Contract Overview
- London Metal Exchange, October Stock Summary Workbook
- Teck Resources, Unaudited Third Quarter Results
- Freeport-McMoRan, Third-Quarter and Nine-Month Results
- Southern Copper, Production by Operation
- Equedia News, Codelco Lowers Its Copper Output Forecast
- Equedia News, Freeport-McMoRan Stock Falls 6.56%
Disclaimer: This letter is for informational and educational purposes only and does not constitute investment advice. Past predictions and performance are not indicative of future results. Please see our full terms of use and disclaimer at equedia.com.






